Merytt Talk through your business
Systems

Every tool was a good decision. Nobody decided how they fit together.

Each tool was bought to fix one problem, so the same client gets typed in three times. Here is how to pick one home for each kind of record, connect the rest to it, and cut the overlaps.

By Aidan SmaleWritten Five minutes to read

1,200times a day, roughly, that workers switched between apps and websites in a study published by Harvard Business Review.
9%of their time at work went on finding their feet again after each switch, the same study found.
38%of small business workers named data entry as one of their most time-consuming tasks, in a Zapier survey of 2,000 people.
One homefor each kind of record. Clients, jobs and money. Everything else reads from it. That is our view, not a study.

Why don’t my business tools talk to each other?

Because each one was bought to fix one problem. A CRM for leads, an accounting package for invoices, a project tool for jobs. Nobody decided how they fit together, so the same client gets typed in three times. The fix is to pick one home for each kind of record, and connect the rest to it.

That is the short answer. The longer one is that nothing went wrong. Every tool was a good decision on the day you made it.

The trouble is the gaps between them. A new client signs. Someone adds them to the CRM. Someone else adds them to the accounts. A third person sets them up in the project tool, and spells the company name a little differently.

Software that doesn’t talk to each other is not a software problem. It is a decision nobody made.

What does double data entry really cost a small business?

More than the minutes it takes to type. The typing is the visible part. The checking, the fixing and the switching are the rest.

In 2021 Zapier surveyed 2,000 US knowledge workers at businesses with fewer than 250 staff. Data entry was the task most often named as one of the most time-consuming, by 38% of them. Copying data from one place to another was named by 31%.

Then there is the switching. Researchers writing in Harvard Business Review tracked 137 people across three large companies for up to five weeks. They toggled between apps and websites roughly 1,200 times a day. Getting their bearings again after each switch added up to about 9% of their working time.

That study was in big companies, not small ones, and Zapier is a company that sells automation. Treat both as a signal, not a measurement of your business.

In a small firm the cost usually shows up somewhere else. The owner. When the systems disagree, someone has to decide which one is right, and that question tends to land on the person who knows everything.

What is a single source of truth for a small business?

It means one tool is the official home for one kind of record. If two tools disagree, that one wins. Everyone knows which it is, and they update it there first.

Most small businesses only need three:

  • Clients. Names, contacts, who looks after them. Often this is the CRM. In some firms it is the accounts package, and that is fine.
  • Jobs. What was agreed, who is on it, where it stands. Usually the project or job tool.
  • Money. Invoices, payments, what is owed. Almost always the accounting package.

Which tool wins matters less than everyone agreeing. Pick the one your team already keeps most up to date. That is the one people trust.

Once the homes are picked, every other tool reads from them. Nobody types a client into the project tool any more. The client arrives there from the home.

How do I integrate my CRM and accounting software?

Start with the moment, not the software. Ask when a record should move, and in which direction. For example, when a quote is accepted in the CRM, the client should appear in the accounts. That one sentence is most of the design.

Then work down this list, and stop at the first one that does the job:

  1. The built-in connection. Most accounting packages list the tools they already connect to. Xero, for example, says its app store lists over 1,000 certified apps, including CRMs. Check yours before you build anything.
  2. A connector tool. Services like Zapier pass a record from one app to another when something happens. Good for simple, one-way moves.
  3. A custom connection. Built to fit, when the first two cannot handle how you work. It costs more to make and needs looking after.

Two rules save a lot of pain. Move records one way where you can, from the home outwards. And connect the few fields you actually use, not everything. Syncing every field both ways is how two tools end up quietly overwriting each other.

How many software subscriptions is too many for a small business?

There is no magic number. A ten-person engineering practice might need more tools than a fifty-person agency, because the work is different. Counting apps tells you very little.

The test is overlap. Too many apps means two or more tools doing the same job, or holding the same record. Watch for these signs:

  • Two places where a client’s phone number lives, and they do not match.
  • A tool only one person uses, for something another tool already does.
  • A subscription nobody can explain, still renewing every month.
  • Someone keeping a spreadsheet “to be sure”, because they do not trust the system.

That last one is the clearest. A side spreadsheet is a vote of no confidence. It means the real source of truth has moved somewhere nobody chose.

What can I do this week to fix it for free?

Make a one-page subscription list. It takes about an hour, a coffee, and your last few card or bank statements. No new software.

Write one line for every tool the business pays for, or relies on for free. For each one, note three things:

  • The tool. Its name, and roughly what it costs.
  • The owner. The one person who decides how it is used. If nobody does, write “nobody”.
  • What it is the source of truth for. Clients, jobs, money, or something else. If the honest answer is “nothing”, write that too.

Now read it back. Look for two tools claiming the same record. Look for tools with no owner. Look for the ones that are the source of truth for nothing.

Those are your overlaps. Cancel what you can, pick a home for each record, and decide which one gap to connect first. Usually it is the one where a new client gets typed in twice.

What should I connect first?

The gap that costs the most attention, not the one that is easiest to build. In most firms that is the handover from winning work to doing it, or from doing it to billing it.

Connect one gap. Live with it for a month. Then do the next. A business that fixes one handover properly gets more relief than one that half-connects everything at once.

If you do the list and want a second pair of eyes on it, we are happy to talk it through.

Where this comes from.

Every figure here is somebody else’s: published, dated and linked. We do not write numbers we cannot point at.

  1. How much time and energy do we waste toggling between applications?Rohan Narayana Murty, Sandeep Dadlani and Rajath B. Das, Harvard Business Review, 29 August 2022. 137 users in 20 teams across three Fortune 500 companies: roughly 1,200 toggles a day, about 9% of working time.
  2. Zapier report: The 2021 state of business automationZapier, 20 April 2021. Online survey of 2,000 US knowledge workers at businesses with fewer than 250 staff, March 2021. The 38% data entry and 31% copying data figures. Zapier sells automation software.
  3. App integrationsXero. States that the Xero App Store lists over 1,000 certified apps, including CRM, payroll and job management. A vendor page, used here only as an example of a built-in connection.

Last checked 28 October 2026. Tool names are examples, not recommendations. Check what your own software connects to before you build anything.

Questions

Why doesn’t my business software talk to each other?

Because each tool was bought to fix one problem, and nobody decided how they fit together. So the same client or job gets typed in more than once. The fix is to pick one home for each kind of record, such as clients, jobs and money, and connect the other tools to it.

What is a single source of truth for a small business?

It means one tool is the official home for one kind of record. If two tools disagree, that one wins, and everyone updates it there first. Most small businesses need three: one for clients, one for jobs and one for money.

How do I connect my CRM and accounting software?

Decide the moment a record should move and in which direction, for example when a quote is accepted. Then check the built-in connections your accounting package lists, try a connector tool for simple one-way moves, and only build a custom connection if neither fits. Connect the few fields you use, not everything.

How many software subscriptions is too many for a small business?

There is no magic number. The test is overlap: two tools doing the same job or holding the same record, tools with no owner, and side spreadsheets kept because people do not trust the system. Those are the ones to cut or connect.

How do I stop double data entry?

Make a one-page list of every tool, who owns it, and what it is the source of truth for. Where two tools hold the same record, pick one as the home and have the other read from it. Start with the gap where a new client gets typed in twice.

Want a second pair of eyes on your tools?

Thirty minutes with a founder. Bring your list of tools, and we will tell you straight where the overlaps are and which gap to connect first.

Or take the six-question diagnostic